2000 lph ro plant
specifications:-
- Input water source: Borewell water, tap water, or any other water source with TDS (total dissolved solids) up to 2000 ppm (parts per million)
- Filtration stages: Multi-stage pre-treatment including sediment filters, activated carbon filters, and anti-scalant dosing to remove impurities and protect RO membranes
- Membrane type: Thin Film Composite (TFC) RO membranes with a capacity of up to 2000 LPH
- Membrane configuration: 4-inch diameter membrane housing with multiple membranes in parallel depending on the capacity and recovery rate required
- Recovery rate: 50% to 75% depending on the quality of the input water and the desired output water quality
- Permeate quality: Purified water with TDS less than 10 ppm and free from bacteria, viruses, and other impurities
- Reject water disposal: Depending on local regulations, the reject water can be discharged to the drain or recycled for other purposes
- Operating pressure: 10 to 12 bar for the RO system and 2 to 3 bar for the pre-treatment system
- Power supply: AC 220V/380V, 50Hz/60Hz
- Dimensions (L x W x H): Varies depending on the manufacturer and the configuration of the plant. Typically, a 2000 LPH RO plant would require a space of around 4 meters x 2 meters x 2.5 meters (L x W x H)
- Weight: Varies depending on the manufacturer and the configuration of the plant. Typically, a 2000 LPH RO plant would weigh around 1000 kg to 1500 kg.